Solartron Mobrey 3595 4C, User Manual

Page: 75 / 128

3595 4C User Manual Part Two IMP Commands
35952350 (CH01/AA)
1-23
Table 1.10: Average scan times for Fast Integration IMP devices
Average * Scan Time (ms)
IMP Type Measurement mode
FR2 FR3 FR4 FR5
3595 1A Voltage 189 159 81 71
3595 1B Voltage 176 155 95 84
3595 1C/1E Voltage 225 196 112 111
3595 1A Thermocouple 300 292 270 269
3595 1C/1E Thermocouple 337 328 311 309
3595 1A Thermocouple with OCTD 403 385 338 335
3595 1C/1E Thermocouple with OCTD 474 454 408 408
3595 1B Strain 360 328 238 221
3595 1B Resistance 284 254 168 151
3595 1B Temperature (PRT) 355 322 234 121
Notes on Autoscan Firmware
1.
IMP types not fitted with Autoscan firmware will ignore the SP command.
2.
IMP types that have the Autoscan firmware are:
3595 1A/3595 51A Mod. Strikes C13/A9
3595 1B/3595 51B Mod. Strikes C17/10
3595 1C/3595 51C Mod. Strikes C16/A9
3595 2A/3595 52A Mod. Strikes B12/A10
3595 1E/3595 51E Mod. Strikes A1
3595 2B/3595 52B Mod. Strikes A1
3595 1H Mod. Strikes A1
3595 1J Mod. Strikes A1
3.
IMP devices that may be fitted retrospectively with the Autoscan firmware are:
35952A Mod. Strike B11, Issue X
359552A Mod. Strike A9. Issue X
4.
All IMP interfaces must be fitted with the correct issue of firmware – that is, firmware to issue AE. To
get the firmware updated for types 3595 4A, 6A or 8A, contact Solartron Mobrey. The type 4B and
types 9A/9B/9D will always have the correct issue of firmware fitted.
Example: An example of a command string, in IMPVIEW, using the SP command is:
AR;SP’100’;CO;TR
Where: AR arms the IMP,
SP’100’ sets a scan period of 100ms,
CO enables the continuous mod, and
TR triggers the IMP
This command string instructs the IMP to scan all channels of the IMP, continuously every
100ms.