Solartron Mobrey 3595 4C, User Manual

Page: 60 / 128

IMP Commands 3595 4C User Manual Part Two
1-8
35952350 (CH01/AA)
1.3 COMMAND DIRECTORY
In this directory, the IMP commands are classified under the following headings:
Commands for Analogue and Digital Measurements
Commands for Analogue Measurements Only
Commands for Thermocouple Measurements
Commands for Strain Gauge Measurements
Commands for Digital Measurements Only
Commands for Analogue Outputs
Additional Commands for the Universal IMP
In each section, commands appear in alphabetical order.
Each command description is headed with the command code and the command title in brackets.
For example:
CH MO
(Set CH annel MO de)
The command syntax is shown by a flow diagram, which includes any command variables.
For example:
Note that the command codes are shown in bold UPPER CASE characters and variables in lower case
Italics. Only the items in boxes form part of the command string. A description of each command variable,
and the variable limits, appear under the flow diagram as illustrated above. Following the flow diagram, the
following information is given:
Note Detailing specific IMP devices when appropriate.
Function Description of command function.
Response What the IMP transmits to the PC in response to the command
See also Other related commands.
In some cases, an example of use is given also.
CH
n MO m
Where:
n is an integer that defines the channel number:
in the range 1
≤
n
≤
20 for IMP types 3595 1A, 1C, 1E, 1H, 1J and 2A,
in the range 1
≤
n
≤
10 for IMP type 3595 1B, and
in the range 1
≤
n
≤
32 for IMP type 3595 2B
m is a 3-digit code which defines the channel mode