Solartron Mobrey 3595 4C, User Manual

Page: 106 / 128

IMP Commands 3595 4C User Manual Part Two
1-54
35952350 (CH01/AA)
START
IMP SPECIFIC SET-UP
(See opposite page)
Use CH MO command to
set mode on each channel
Use LO command to configure IMP
with previously stored set-up data
(including initial strain gauge data)
Use LO command to
configure IMP with
previously stored set-up
data (including initial
strain gauge data)
STRAIN GAUGE SET-UP
(if applicable) see opposite page
Use SA command to save set-up
data (IMP configuration) to Host PC
3595 IMP TYPE 2A and 2B:
Use EV command to enable event logging.
3595 IMP TYPE 2A ONLY:
Use CL command to clear 'totalise counters'..
Use RD command.
Restores database
on 3595 IMP types
1H and 1J
Use AR command to enable measurements.
Use
TR
command to take
measurement on all channels.
Use DI command to disable measurements.
Use the CO and TR
commands, or SP , CO
and TR commands to
take continuous
measurements.
NOT 3595 IMP TYPE 2B:
Use ME command to take
measurement on one channel.
Use HA command to stop
continuous measurements.
AS=1
3595 IMP types
1H and 1J starts
automatically
SET-UP
BASIC MEASUREMENT
Read scans Read scan Read measurement
next IMP
repeat measurement(s)
Figure 1.5: Set-up and basic measurement