Solartron Mobrey 3595 4C, User Manual

Page: 89 / 128

3595 4C User Manual Part Two IMP Commands
35952350 (CH01/AA)
1-37
EV
(enable EVent capture)
EV e
Where: e = 0, stop event capture
e = 1, enable event capture
Note: This command applies only to the digital IMP (types 2A and 2B).
Function: Enables event capture on any channels in the IMP already set to ‘event capture mode’.
Event capture can be enabled or stopped only by this command.
TR igger, AR m or ME easure commands have no effect on event capture.
Response: Event data is sent to stream 2. For a detailed explanation on event result
formats, see Chapter 2.
See also: CH MO and ES
ES
(Event Status)
ES
Note: This command applies only to digital IMP (types 2A and 2B)
Function: This command checks the configuration for channels selected for event capture, and for each
one, inserts an event status result with time tag into the event buffer. This command
operates independently, whether events are enabled or not. If the event buffer is full, this
command, in part or in full, is ignored. It will not affect the events lost count.
Note: Only a digital IMP with a product status marked B4 onwards and the Switch IMP are
able to comply with this command.
Response: Event Status data is sent in stream 2. For a detailed explanation on event status formats,
see Chapter 2.
See also: CH MO and EV