Solartron Mobrey 3595 4C, User Manual

Page: 63 / 128

3595 4C User Manual Part Two IMP Commands
35952350 (CH01/AA)
1-11
Table 1.4: Mode Codes for IMP type 1B (Strain)
Code, m Mode Set Comments
000 Skip
100
101
102
103 Volts, dc, auto-ranging
Volts, dc, 20mV range
Volts, dc, 200mV range
Volts, dc, 2V range
There is no ‘10V range’.
Resistance, 4-terminal,
200
201
202
203 0.8mA drive, auto-ranging
0.8mA drive, 25
Ω
range,
0.8mA drive, 250
Ω
range,
0.8mA drive, 2k5
Ω
range
Resistance, 3-terminal,
210
211
212
213 0.8mA drive, auto-ranging
0.8mA drive, 25
Ω
range,
0.8mA drive, 250
Ω
range,
0.8mA drive, 2k5
Ω
range
* Only an IMP with a product status of C6 (or
higher) are able to comply with an auto-ranging
command.
RTD/PRT, 100
Ω
, 4-terminal,
400
411
412
413 “ auto-ranging
“ 20mV range
“ 200mV range
“ 2V range
RTD/PRT, 100
Ω
, 3-terminal
410
411
412
413 “ auto-ranging *
“ 20mV range
“ 200mV range
“ 2V range
* Only an IMP with a product status of C6 (or
higher) are able to comply with an auto-ranging
command.
Strain Gauges:
600 – 603
610 – 613
620 – 623
630 – 633
640 – 643
650 – 653
660 – 663
670 - 673
½-bridge, 4mA dual current.
½-bridge, 0.8mA dual current.
¼-bridge, 4mA dual current.
¼-bridge, 0.8mA dual current.
Full-bridge, 8mA drive
Full-bridge, 1.6mA drive
Three-wire, 4mA drive
Three-wire, 0.8mA drive.
The last digit in the code sets the range:
0 = auto-ranging,
1 = 200mV range,
2 = 200mV range,
3 = 2V range.