Solartron Mobrey 3595 4C, User Manual

Page: 78 / 128

IMP Commands 3595 4C User Manual Part Two
1-26
35952350 (CH01/AA)
ST
(STatus)
ST
Function: Instructs the IMP to respond with information on type of IMP, connector block, and
firmware fitted.
Response: Stream 3, 12 characters:
x x b c r f n n y z
Where:
xx IMP code; indicates IMP type (See Table 1.11)
b Connector block code; indicates connector block type. (See Table 1.12)
c Bit function depends on the type of IMP. For the 35951D Analogue Output IMP,
c indicates the minimum output current, ‘0’ for 0A or ‘4’ for 4mA. For all other
IMP types, c is set to ‘A’ if the IMP is capable of responding to a SP command.
r binary counter of the number of communication retries.
f If f = F, the IMP is capable of responding to an FR 0 or FR 1 command.
nnyz The software number, status and issue. The software numbers are related to the
IMP type and are listed in Table 1.11.
Example: A response of 1CDA—F-03FB indicates a ‘3595 1G reed relay thermocouple’ IMP with a
‘3595 3D attenuator’ connector block and firmware version 03FB. The IMP can respond
both to the
SP command and to the FR command.
Table 1.11: IMP Codes
IMP Code
(xx)
Software No.
(nn)
IMP Type
Software IMP
Part Number
1A 01 Solid State (thermocouple). 3595 1A
1B 02 Strain Gauge. 3595 1B
1C 03 Reed Relay (thermocouple). 3595 1C
1D 11 Analog Output. 3595 1D
1E 25 500V Reed Relay (thermocouple). 3595 1E
1H 30 Universal IMP (200V ch-ch isol.). 3595 1H
1J 30 Universal IMP (500V ch-ch isol.). 3595 1J
2A 04 Digital. 3595 2A
2B 18 Switch. 3595 2B