manualshive.com logo in svg

Sokkia SRX1, Operator'S Manual, Page: 90 / 184

Share
Download
Sokkia SRX1 Operator'S Manual Download Page 90

16. RESECTION MEASUREMENT

82

Standard deviation for the northing and easting 
coordinates of each point are displayed in the 
Detail tab.

8. If there are problems with the results of a point, 

align the cursor with that point and press 

[BAD]

. 

“BAD” is displayed to the right of the point. 
Repeat for all results that include problems. 

9. Press 

[RE CALC]

 to perform calculation again 

without the point designated in step 8. The result 
is displayed.
If there are no problems with the result, go to step 
10.
If problems with the result occur again, perform 
the resection measurement from step 3. 
• Press 

[RE OBS]

 to measure the point 

designated in step 8. 
If no points are designated in step 8, all the 
points or only the final point can be observed 
again.

• Press 

[ADD]

 when there is a known point that 

has not been measured or when a new known 
point is added.

10.  Press 

[OK]

 in <Resection/result> to display 

<Resection/Set h angle>.

Summary of Contents for SRX1

























































































































































































Reviews:

No comments