Sokkia SRX1, Operator'S Manual, Page: 89 / 184

81
16. RESECTION MEASUREMENT
4. Sight the first known point and press [DIST] to
begin measurement.
The measurement results are displayed on the
screen.
• When
[ANGLE] has been selected, the distance
cannot be displayed.
5. Press [YES] to use the measurement results of
the first known point.
• You can also input target height here.
• Press
[NO] to return to the screen in step 3 and
perform measurement again.
6. Repeat procedures 3 to 4 in the same way from
subsequent points.
When the minimum quantity of observation data
required for the calculation is present,
[CALC] is
displayed.
7. Press [CALC] or [YES] to automatically start
calculations after observations of all known points
are completed.
• Instrument station coordinates, station elevation,
and standard deviation, which describes the
measurement accuracy, are displayed.