manualshive.com logo in svg

Sokkia SRX1, Operator'S Manual, Page: 45 / 184

Share
Download
Sokkia SRX1 Operator'S Manual Download Page 45

37

8. CONNECTING TO EXTERNAL DEVICES

PROCEDURE Necessary settings for Bluetooth communication 

1. Select "Comms" in SETTINGS mode. Set Comms 

mode in the Comms setup tab to "Bluetooth".

2. Select a mode for the SRX in the Bluetooth tab.

To initiate connections from the SRX side, set the 
SRX as the "Master" device. To initiate 
connections from the paired device side, set the 
SRX as "Slave".
The factory setting is "Slave".
Register companion devices.

•"Master" cannot be selected when no companion 

devices have been registered.

3. Select, in "Link", a companion device from among 

the Bluetooth devices already registered in the 
SRX.

Registering devices: "PROCEDURE 
Registering Bluetooth companion devices"

•Companion devices cannot be selected when the  

SRX is set as "Slave".

4. Set "Authentication" to "Yes" or "No". 

Summary of Contents for SRX1

























































































































































































Reviews:

No comments