Sokkia SRX1, Operator'S Manual, Page: 62 / 184

11. TARGET SIGHTING
54
PROCEDURE
1. Use the peep sight to aim the objective lens in the
general direction of the target. The vertical and
horizontal jogging knobs can be used for precise
adjustments of the instrument and telescope.
2. Select [SRCH] in any Meas mode screen. The
telescope and top half of the instrument rotate
and target auto-search begins. When the target is
found, the instrument sights the center of the
prism and stops.

Allocating the [SRCH] softkey:
"21.6 Allocating Key Functions"

• The following softkeys can also be used for Auto Pointing when "A.T. Setting" in <Motor
configuration> is set to "Search".

Motor settings: "12.1 Auto Tracking Settings"
11.2
Auto-Pointing Function for Target Sighting
Softkey Function
[DIST] Performs Auto Pointing then distance and angle measurement
[SRCH] Performs Auto Pointing then distance and angle measurement
[H.ANG] Performs Auto Pointing then sets current angle to the specified angle
[0 SET] Performs Auto Pointing then sets current angle to 0
[RC] Rotates in the direction specified by the On-demand Remote Control
system then performs Auto Pointing
[<-RC] Rotates in a counterclockwise direction (from the point of view of the
RC Controller) then performs Auto Pointing
[RC->] Rotates in a clockwise direction (from the point of view of the RC
Controller) then performs Auto Pointing
[ROTATE] Automatically rotates the instrument to the specified vertical and
horizontal angles then performs Auto Pointing
[TURN] Rotates the SRX 180° then performs Auto Pointing