Sokkia SRX1, Operator'S Manual, Page: 132 / 184

21. CHANGING THE SETTINGS
124
2. To edit a target, select the desired target and
press [EDIT] . <Reflector/edit> is displayed.
Select/input relevant information for the target.
Target: Prism/mini-Prism/Sheet/
Reflectorless/360° Prism
Const.: -99 to 99 mm
Aperture: 1 to 999 mm
• When selecting "Reflectorless" in "Reflector",
prism constant correction and aperture values
are set to "0" automatically.
3. Press [OK] in the screen of step 2 to save edited
information and return to <Reflector setting>.
Press
[OK] to return to <EDM configurations>.
It is possible to allocate tabs in Meas mode to suit the measurement conditions. It is possible to
operate the SRX efficiently because unique tab allocations can be preset to suit various applications
and the ways that different operators handle the instrument.
• The current tab allocations are retained until they are revised again, even when the power is cut off.
• Press
[CLEAR] in <Customize/Select screen> to return all customized configurations to their
previous settings.
• One screen can contain a maximum of 5 tabs.

• When tab allocations are recorded and registered, the previously recorded tab settings are cleared.
Åú Tab allocations
The following are tabs allocated when the SRX was shipped and tabs that can be defined by the
user.
• Basic measurement
21.4 Allocating User-defined Tabs
Factory settings User-definable tabs
SHV SHV
SHVdist SHVdist
Graphic Graphic
SHV + Coord.
Free