Sokkia SRX1 Operator'S Manual Download Page 5

Page: 5 / 184

iii

SURVEYING INSTRUMENTS

• Bluetooth:

Bluetooth

is a registered trademark of Bluetooth SIG, Inc.

•

Windows CE

is a registered trademark of Microsoft Corporation.

• All other company and product names featured in this manual are registered trademarks of each

respective organization.

Operation procedure

• Learn basic operations in "4. PRODUCT OUTLINE" and "5. BASIC OPERATION" before you read

each measurement procedure. An overview of the available SRX functions is given in
"4.1 Functions". For selecting options and inputting figures, see "5.1 Basic Key Operation".

• For Auto Tracking measurement, read this manual in conjunction with the On-demand Remote

Control System Manual.

• Measurement procedures are based on continuous measurement. Some information about

procedures when other measurement options are selected can be found in “Note” (



Summary of Contents for SRX1

























































































































































































Search results

Summary of Contents for SRX1

Reviews:

Sokkia SRX1, Operator'S Manual, Page: 5 / 184

Search results

Summary of Contents for SRX1

Reviews: