manualshive.com logo in svg

Sokkia SRX1, Operator'S Manual, Page: 38 / 184

Share
Download
Sokkia SRX1 Operator'S Manual Download Page 38

5. BASIC OPERATION

30

Press 

{SETTINGS} 

to switch to screens for tilt correction, returned signal checking, motor operation, 

fixed velocity rotation,and general configuration

Performing settings: "21. CHANGING THE SETTINGS", Tilt settings: "9.2 Levelling", Returned 
signal checking: "14.1 Returned Signal Checking"

●

Motor settings

The instrument can be automatically rotated to a desired vertical and/or horizontal angle by 
specifying the angle in the "Motor" tab and selecting

 [ROTATE]

. 

• The following operations can be performed using the softkeys in the second page.

[READ]

 

: Read in coordinates from Program mode (SDR) and set as the desired angle.

[COORD]

: Specify rotation angle by inputting coordinates in <Key in coord>.

[TURN]

: Rotate the SRX 180°.

[CNFG]

 

: Perform Motor configuration settings. 

 "12.1 Auto Tracking Settings"

5.4

SETTINGS Mode

Summary of Contents for SRX1

























































































































































































Reviews:

No comments