manualshive.com logo in svg

Sokkia SRX1, Operator'S Manual, Page: 127 / 184

Share
Download
Sokkia SRX1 Operator'S Manual Download Page 127

119

21. CHANGING THE SETTINGS

Items set and options (*: Factory setting)

Power off:

5min./10min./15min./30min.*/No

Backlight (Reticle ON):

0 to 8 (6*) (Brightness level on pressing

 {

}

)

Backlight (Normal):

0 to 8 (2*) 

Backlight Off:

30sec/1min./5min./10min./No*

Key backlight:

Off*/On

Reticle: 

0 to 5 level (3*)

EDM ALC:

Hold*, Free

Guide pattern:

1* (simultaneous), 2 (alternating)

Beep:

Off/On*

Remote PWR-On:

Yes/No*/Yes(Serial)/Yes(Bluetooth)

Color:

1*/2 (monochrome)

Backlight settings

Pressing 

{

}

 switches the brightness level of the backlight between the settings made in 

"Backlight (Reticle ON)" and "Backlight (Normal)". 
When "Backlight (Reticle ON)" is selected the reticle will also be illuminated. 
When the SRX is powered ON the brightness level is set to "Backlight (Normal)". "Backlight 
(Normal)" was set to a higher brightness level than "Backlight (Reticle ON)" when the SRX was 
shipped but these values can be modified according to user preferences.

21.2

Instrument Configuration

Summary of Contents for SRX1

























































































































































































Reviews:

No comments