Sokkia SRX1, Operator'S Manual, Page: 105 / 184

97
17. SETTING-OUT MEASUREMENT
5. Press [H.ROTA] to automatically rotate the SRX
until the angle of the setting out point reads 0°.
Position the target on the line of sight and press
[DIST] to begin distance measurement.
The distance and direction to move the target until
the setting out point is located is displayed on the
SRX. The sighting point measurement results
(currently installed position of the target) are
displayed.
• <Set out Coords> can also be displayed by
selecting "Set out coords" in <Setting out>.
• Switch between the tabs to display different sets
of information.
Move the target closer/further away and upward/
downward to find the correct distance (0 is
displayed) to the setting out point.

Movement indicators: "17.2 Distance Setting-
out Measurement" step 5