manualshive.com logo in svg

Sokkia SRX1, Operator'S Manual, Page: 35 / 184

Share
Download
Sokkia SRX1 Operator'S Manual Download Page 35

27

5. BASIC OPERATION

(3)  Motor configuration

Configuration of Auto Pointing/Auto Tracking status.

: Auto Tracking ON
: Auto Pointing ON
: Both Auto Tracking and Auto Pointing OFF
: Start Auto Tracking."AT Off" is displayed when in "Prism wait" 
  status. Press to quit Auto Tracking.

One of the following icons will be displayed while the motor is in operation to indicate the current 
status of the SRX.

: Rotating

: Rotating at fixed velocity

: Searching

: Auto Tracking in progress (when Auto Tracking set)

: Target lost (when Auto Tracking set)

: (Flashes red) Waiting for prism (when Auto Tracking set)

Motor settings: "11.1 Auto Pointing Settings", "12.1 Auto Tracking Settings"

• Auto Tracking and Auto Pointing cannot be performed when "Reflectorless" has been selected as 

the target  type.  Auto Tracking cannot be performed when "Sheet" has been selected as the target  
type.  

 will be displayed.

• An arrow indicating turn direction will be displayed when the SRX is rotating at a fixed velocity.

 

Fixed velocity rotation: "5.4 SETTINGS Mode

 ●

 Fixed velocity rotation"

(4) Laser-pointer/guide light

Configuration of laser-pointer/guide light status.

 Switching the laser-pointer/guide light ON/OFF: "5.1 Basic Key Operation"

: Guide light ON
: Guide light OFF
: Laser-pointer ON
: Laser-pointer OFF

• The laser-pointer will be automatically switched OFF during distance measurement.

Summary of Contents for SRX1

























































































































































































Reviews:

No comments