manualshive.com logo in svg

Sokkia SRX1, Operator'S Manual, Page: 131 / 184

Share
Download
Sokkia SRX1 Operator'S Manual Download Page 131

123

21. CHANGING THE SETTINGS

• By inputting the temperature and air pressure values, the atmospheric correction value is 

calculated and set into the memory. Calculate the atmospheric correction factor as shown in the 
following formula.

"30.2 Atmospheric Correction for High Precision Distance Measurement"

•If the weather correction is not required, set the ppm value to 0.

PROCEDURE Recording and editing target information

The 

[LIST]

 softkey is be displayed when either "Reflector" or "Prism const." is selected in the EDM tab 

of <EDM configurations>.

1. Press 

[LIST]

 to display a list of all recorded 

targets.

•

[ADD]

: Displays <Reflector list>. Select the 

desired target from this list and press 

[OK] 

to 

add to the list in <Reflector setting>. Up to a 
maximum of 6 targets can be recorded.

•

[DEL]

: Deletes the selected target.

ppm = 282.59 -

0.2942 x air pressure (hPa)

1 + 0.003661 x air temperature (°C)

Summary of Contents for SRX1

























































































































































































Reviews:

No comments