manualshive.com logo in svg

Sokkia SRX1, Operator'S Manual, Page: 4 / 184

Share
Download
Sokkia SRX1 Operator'S Manual Download Page 4

ii

H

OW

 

TO

 

READ

 

THIS

 

MANUAL

Regarding other manuals

•

Manuals 2, 3, and 4 below are electronic manuals provided on a CD-ROM in PDF format (

)

.

•

The SRX comes equipped with 4 manuals for operation information:

1. SRX Operator’s Manual (this manual): 
    Explains basic operation and functions of the SRX.

2. Series SRX SDR Software Reference Manual 

: 

   Explains advanced measurement operations using the SRX in Program mode (SDR), and

methods for managing measured data.

3. SFX Dial-Up Program Explanations 

: 

    Explains how to send and receive data using the SFX function

4. Series SRX Quick Manual 

:

    Simplified explanations of operations such as Auto-Tracking to allow users to get started

straight away.

   

Symbols

The following conventions are used in this manual.

[Softkey]

 etc.

: Indicates softkeys on the display and window dialog buttons.

{Key}

 etc.

: Indicates keys on the operation panel.

<Setting out> etc.: Indicates screen titles.

Notes regarding manual style

• Except where stated, “SRX” means “SRX1/SRX2/SRX3/SRX5” in this manual.
• Screens and illustrations appearing in this manual are of SRX3.
• Location of softkeys in screens used in procedures is based on the factory setting. It is possible to 

change the allocation of softkeys.

Softkey allocation: "21.6 Allocating Key Functions"

• Kodak Gray Card: 

KODAK

 is a registered trademark of Eastman Kodak Company.

:

Indicates precautions and important items which should be read before 
operations.

:

Indicates the chapter title to refer to for additional information.

:

Indicates supplementary explanation.

:

Indicates an explanation for a particular term or operation.

Summary of Contents for SRX1

























































































































































































Reviews:

No comments