Ski-Doo FORMULA III, Shop Manual

Page: 185 / 356

Section 05 TRANSMISSION
Sub-Section 02 (DRIVE PULLEY)
05-02-8
CAUTION : Lever ass’y and rollers must
move easily after installation.
5,6,18,19, Fixed Half, Sliding Half,
Spring, Spring Cover and Screw
To install spring cover, use spring compressor (P /
N 529 0151 00).
Assemble fixed and sliding halves. Note that fixed
halves have different cone angle. Match cone an-
gle with crankshaft.
Lift sliding half against spring cover and align
spring cover arrow with sliding half mark.
1. Align
Install and torque screws to 10 N•m (89 lbf• in ).
6,25,29, Sliding Half, Slider Shoe and
Governor Cup
To install governor cup, use following tool :
Insert spring and slider shoes into governor cup
so that groove in each slider shoe is vertical to
properly slide in guides.
-
A16D0DA
1
A16B01A
529 0055 00