Ski-Doo FORMULA III, Shop Manual

Page: 156 / 356

Section 04 ENGINE
Sub-Section 10 (REWIND STARTER)
04-10-4
Install locking ring.
CAUTION : This lubricant must NOT be
used on rewind springs as it does not stay
on when dry.
INSTALLATION
On fan cooled models with oil injection pump, re-
install oil pump on rewind starter assembly.
All Engines Except 670
Reinstall rewind starter assembly on engine.
670 Engine Only
Install rewind starter on damper ring matching
notches and emboss of damper ring.
1. Notch
All Models
6, Starter Rope
Thread starter rope through rope guide when ap-
plicable.
16, Starter Grip
Prior to installing starter grip on new rope, it is first
necessary to fuse the rope end with a lit match.
Pass rope through rubber buffer and starter grip
and tie a knot in the rope end. Fuse the knot with
a lit match then insert rope end down and pull the
starter grip over the knot.
-
A01C56A
1
A03C0VA
A01C18A