Silverline Fall Arrest Harness, Manual

Page: 4 / 48

4
GB
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Read instruction manual
Caution!
Conforms to relevant legislation and safety standards
Safety Instructions for Height
Safety Equipment
WARNING: Activities involving the use of this equipment are inherently
dangerous. ALWAYS carry out a risk assessment before work commences,
including rescue arrangements.
WARNING: Specific training is essential before using this equipment. It
must only be used by competent and responsible individuals, taking care not
exceeding the limitations of the equipment.
WARNING: Failure to adhere to any warnings and recommendations given
in these instructions may result in severe injury or even death! When using this
equipment you personally assume all risks and responsibilities for all damage,
injury or death which may occur during or following incorrect use of this
equipment. You are responsible for your own actions and decisions. If you are
unable, or not in a position to assume this responsibility or to accept these
risks, DO NOT USE THIS EQUIPMENT.
a) NEVER use equipment that has exceeded its shelf and/or service life.
b) This product MUST NOT be stressed beyond its strength rating.
c) DO NOT use components of fall arrest gear outside its limitations, or for
applications for which they were not specifically designed.
d)
Avoid impacts and rubbing against abrasive surfaces during use,
transport and storage.
e)
DO NOT use connectors with manual locking mechanisms in areas
where they are frequently opened and closed.
f) Ensure locking mechanisms and safety devices engage securely and
connectors are fully closed and locked before use.
g) NEVER combine components that are not recommended by the
manufacturer as being compatible.
One item may interfere with the safe
function of another, jeopardising the function of the system as a whole.
h)
NEVER attach a fall arrest system to an anchorage if you are unsure
about the strength and condition of the anchorage.
i) Take into account the length of every single component of a fall arrest
system, including the connectors, when determining the total length
of the system.
j) The clearance under the user must be sufficient to prevent him from
striking an obstacle in the event of a fall.
k) DO NOT allow any part of a fall arrest, work positioning or restraint
system to come into contact with sharp edges or abrasive surfaces
during use.
Reposition if necessary or choose an alternative anchorage.
l) Any component of a fall arrest system must be individually inspected
according to the manufacturer’s recommendations and procedures.
After assembly, the system must be inspected as a functional unit.
m) Any kind of repair or modification of this equipment is strictly
PROHIBITED.
n) DO NOT tie knots in harnesses, lanyards and ropes. DO NOT allow
equipment to become tangled.
o)
Equipment that has been exposed to extreme conditions, failed an
inspection, or has been used to arrest a fall, must be retired and
destroyed.
Never expose items made with synthetic fibre components to
direct flames.
p)
DO NOT use shock absorbers that have been partially deployed,
or when
the plastic sheath is damaged.
q)
Destroy retired equipment immediately to prevent further use.
r) All users of fall arrest gear must be medically fit for activities at
height and must wear appropriate personal protective equipment for
the environment, work carried out, and tools used.
s) Carry out a risk assessment for every activity, and define a rescue plan
that can be safely and rapidly executed in case of emergency.
t)
All product markings must remain intact and clearly legible for the
entire service life of this equipment.
u) Store the equipment with its dedicated service record and usage
instructions.
Gear with uncertain service history must be removed from
service and destroyed.
v)
Before using this equipment, ensure that it complies with local federal
regulations and other applicable safety standards.
Specification
Model:………………………………….. . . . . . . . . . . . . . . . . . . . 250482
Applicable standards:…………… . . . . . . . . . .EN361 (Full Body Harness)
Purpose:……………………………….. . . . . . . . . . . . . . . . . . . . Fall arrest
Material:…..…………………………… . . . . . . . . . . . . . . . . . . . Polyester
Maximum strength:…………………. . . . . . . . . . . . . . . . . . . . . . . . . .16kN
Temperature range:………………. . . . . . . . . . . . . . . . . . . . . .-40 to +80°C
Attachment points:……………….. . . . . .EN361: Dorsal (A), Sternal (A/2)
Max. user weight:……..………….. . . . . . . . . . . . . . . . . . . . . . . . . . .140kg*
Net weight:…………………………… . . . . . . . . . . . . . . . . . . . . . . 0.90kg
As part of our ongoing product development, specifications of Silverline
products may alter without notice.
*The operator must be able to achieve a safe and comfortable fit, using
the adjustment options provided. The equipment must not be used if it
cannot be adjusted to fit the operator comfortably and securely.
Carefully read and understand these instructions and any label attached
to the tool before use. Keep these instructions with the product for future
reference. Ensure all persons who use this product are fully acquainted with
these instructions.
Introduction
Thank you for purchasing this Silverline tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even if
you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions. Ensure all users of the tool read and fully understand
this manual.
250482_Manual.indd 4 04/01/2018 16:20