Siemens ULTRAMAT 23, Manual, Page: 137 / 244

Functions
8.4 Configuration
ULTRAMAT 23
Manual, 3/2016, A5E37100388-003
137
● Zero:
See following table:
Selectable Analog current
0 - 20 mA 0 mA
2 - 20 mA 2 mA
4 - 20 mA 4 mA
NAMUR - 20 mA 3 mA
● 21 mA:
see following table:
Selectable Analog current
0 - 20 mA 21.0 mA
2 - 20 mA 21.0 mA
4 - 20 mA 21.0 mA
NAMUR - 20 mA 21.5 mA
Analog output during fault
Here, you can define the type of measured value output during
a fault.
Output of the following measured values is possible here:
● Hold: The value measured directly prior to commencement of a fault is output unchanged.
This also applies to the limits which are output (see section Parameters: Limits
(Page 128)).
● Actual: The measured value is continuously updated.