Siemens ULTRAMAT 23, Manual, Page: 107 / 244

Functions
8.1 Diagnostics
ULTRAMAT 23
Manual, 3/2016, A5E37100388-003
107
8.1.2 Diagnostics: Diagnostics values
The diagnostics values provide important information for trou-
bleshooting and adjustments. You can select the four dis-
played function groups in this menu.
If the analyzer contains software for H
2
S measurement, the
adjacent display appears. The following versions are possible
following selection of the 'Probe diagnostic values' parameter
in the 2nd line:
•
Only H
2
S sensor: Following selection of this item, a branch
is made to the diagnostics values of the H
2
S sensor
(section Analyzer status: Diagnostics values: H2S sensor
(Page 109)).
•
H
2
S and O
2
sensors: A query is made for the component,
and a branch then made to the called sensor.
8.1.2.1 Analyzer status: Diagnostics values: IR
In this submenu you can call the diagnostics values of the in-
frared measuring ranges. These are:
• ADU are voltage and signal values of the analog-to-digital
converter prior to temperature compensation. These values
are specific to the component.
• V-ADUt are voltage and signal values of the analog-to-
digital converter following temperature compensation.
T in the bottom line corresponds to the temperature of the
analyzer unit, TS the temperature of the IR source
(empty field = function not yet implemented,
"*****" = no measured value present).