67 / 100
Siemens
Synco™ living Operating instructions
CE1B2707en
Building Technologies
Central apartment unit QAX910
23.08.2008
Doors
You can supervise up to two doors. The doors you want to supervise can be
selected in the option list.
Main menu > Supervision > Doors > Rel "Partly monit":
Main menu > Supervision > Doors > Rel "All monit":
Supervision type
Partly monitored
All monitored
Factory setting
--- (no door)
--- (no door)
Setting
Door 1
Door 2
Door 1
Door 2
Message delay doors
If a supervised door is opened, the fault message "Door open" appears only
after expiration of a set message delay time. In addition, the buzzer, status
output and a switching group function can be activated.
The "Door open" fault message remains active until supervision is
changed, even after all supervised doors are closed.
You can set the duration of the message delay time (00.00..59.55 ms):
Main menu > Supervision > Doors > Message delay:
Factory setting
05.00 ms
Your setting
You must deactivate supervision before the message delay time has
expired to avoid the fault message "Door open" and the alarm sound.
To do this, set the message delay time to ensure that you have suffi-
cient time to go to the central apartment unit and deactivate supervi-
sion when returning home. See page 67.
When a supervised door is opened, a beep is sounded whose frequency
doubles in the last 15 seconds of the message delay time.
You can set the volume of the beep (0..100%) or deactivate it by entering
setting 0%.
When you set the volume, a permanent beep is sounded at the corresponding
volume.
Main menu > Supervision > Doors > Volume mess delay
Factory setting
15%
Your setting
If event "Window / door supervision" is active at the buzzer (see parameter
below), the actual alarm is sounded
