Siemens Synco living Operating Instructions Manual Download Page 27 | Manualshive

Page: 27 / 100

background image

27 / 100

Siemens

Synco™ living Operating instructions

CE1B2707en

Building Technologies

Central apartment unit QAX910

23.08.2008

General

Absence

If you leave the house for a few hours, you can press the

Absence / Supervi-

sion

button to inform the central apartment unit about your departure. Shortly

pressing the

Absence / Supervision

button opens the presence window

which allows you to enter the desired state "Absent" or "Present" via the

Ar-

row

buttons or the

Absence / Supervision

button

.

If supervision functions are configured, the supervision window opens imme-
diately after the absence window to allow you to enter the desired supervision
pattern (see next page).

If "Absent" is entered, only the absence symbol appears on the display.

Pressing the

Absence / Supervision

button again opens the absence window,

and selecting "Present" deactivates the absence function and the related impact.

Your absence has the following impact on the system:

•

During the period of absence, space heating, cooling, ventilation and DHW

is controlled in accordance with the operating mode selected for absence

•

A presence simulation program – if selected – is started

•

Switching groups set for the event “Absence on“ (= going) will operate

accordingly (switching / dimming, blinds open / closed, scenes)

For additional descriptions, refer to the following pages:
Room mode during absence (page 34).
Ventilation operating mode upon absence (page 46)
DHW operating mode during absence (page 55).
Triggering a switching group via an event (page 60).
Presence simulation for switching groups (page 62).

Supervision

Briefly pressing the

Absence / Supervision

button opens the absence win-

dow followed immediately by the supervision window. Press the

Absence /

Supervision

button longer than 0.4 s to open the supervision window imme-

diately. This window allows you to select between the following supervision
patterns by pressing the

Absence / Supervision

button or the

Arrow

buttons:

Inactive

The supervision function is inactive.

Partly monitored

The windows (rooms) and doors selected in the
"Partly monitored" option lists are supervised.

All monitored

The windows (rooms) and doors selected in the
option lists "All monitored" are supervised.

The supervision window appears only if windows or doors are enabled
for supervision. See "Release of supervision“ page 66.

When supervised windows and doors are open and when supervision is acti-
vated, an associated display appears and a constant signal is sounded.

«
...
25
26
27
28
29
...
»

Summary of Contents for Synco living





































































































Reviews:

No comments

Related manuals for Synco living

FEPL-02 Ethernet POWERLINK

Brand: ABB Pages: 2

Brand: ABB Pages: 2

Brand: NCR Pages: 6

Brand: Harmonic Drive Pages: 25

Brand: Nelson Pages: 8

Brand: National Instruments Pages: 2

AMES 4000SS Series

Brand: Watts Pages: 8

CentralControl CC41

Brand: Becker Pages: 48

Brand: GSK Pages: 32

Bell & Gossett Technologic PPS

Brand: Xylem Pages: 20

Brand: Toro Pages: 2

Brand: Sherlotronics Pages: 2

Brand: Alcatel-Lucent Pages: 62

Brand: Genie Pages: 202

Brand: SMC Networks Pages: 10

Brand: The Handy Pages: 4

Brand: Bardac drives Pages: 2

Brand: ICP DAS USA Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands