66 / 100
Siemens
Synco™ living Operating instructions
CE1B2707en
Building Technologies
Central apartment unit QAX910
23.08.2008
Main menu > Supervision > Volume supervis dly:
Factory setting
15%
Your setting
Setting 0% deactivates the signal sound / beep during supervision delay .
Release of supervision
Indicate in the central apartment unit the doors and windows that are to be
"partly monitored" or "all monitored".
These two functions provide for two different types of supervision, e.g. for
short absences when you want to keep open some windows for ventilation
and thus exclude them from supervision. And for longer absences (e.g. vaca-
tion) when you want to supervise all windows and doors.
Windows
The option list contains all rooms. Select the rooms with windows to be super-
vised. If a supervised window is opened, the message "Window open" ap-
pears. In addition, the buzzer, the status output, and a switching group func-
tion can be activated.
The "Window open" fault message remains active until supervision is
changed, even after all supervised windows are closed.
Main menu > Supervision > Windows > Rel "Partly monit":
Main menu > Supervision > Windows > Rel "All monit":
Supervision type
Partly monitored
All monitored
Factory setting
--- (no room)
--- (no room)
Setting
Room 1
Room 2
Room 3
Room 4
Room 5
Room 6
Room 7
Room 8
Room 9
Room 10
Room 11
Room 12
Room 1
Room 2
Room 3
Room 4
Room 5
Room 6
Room 7
Room 8
Room 9
Room 10
Room 11
Room 12
