59 / 100
Siemens
Synco™ living Operating instructions
CE1B2707en
Building Technologies
Central apartment unit QAX910
23.08.2008
Switching groups
Operating the switching groups
Switching groups 1 – 4 can be operated via the 4 pairs of softkeys on the
central apartment unit.
The functions of the switching groups (e.g. switching or dimming lights, open-
ing or closing blinds, calling up info pages or scenes) were defined when the
plant was commissioned.
Switching groups 5 – 8 have no buttons for direct access. Manual
triggering of these switching group functions is only possible via the
respective operating lines on the central apartment unit.
The selected function of the pairs of softkeys is displayed in the form of a
symbol.
Switching group function
Switch
When pressing the key at the top or bottom, the light is switched on
or off.
Switching group function
Dim
Pressing the key at the top or bottom briefly switches the light on or
off. Pressing the keys for > 0.4 seconds increases or decreases the
intensity of light.
Switching group function
Blind
Pressing the keys briefly adjusts the blinds in steps. Pressing the
keys for > 0.4 seconds fully opens or closes the blinds.
Switching group function
Scene
When pressing the keys for < 0.4 seconds, all actuators are driven to
the positions set for the respective scene (A or B).
The key at the top is used for scene A, the key at the bottom for
scene B. When pressing the keys for > 3 seconds, the current posi-
tions of the actuators are stored under the respective scene (A or B).
Storage is confirmed by a short acoustic signal.
Switching group function
Info
When pressing the key at the top or bottom, the info page assigned
to the key is displayed.
The switching groups can also be triggered via the operating lines.
You operate a switching group configured for
Switch, Dim
or
Blind
under:
Main menu > Switching groups > Switching group X > Trigger:
