28 / 100
Siemens
Synco™ living Operating instructions
CE1B2707en
Building Technologies
Central apartment unit QAX910
23.08.2008
During the set supervision delay, you can close the corresponding doors and
windows.
After all supervised windows are closed, the constant signal sound turns into a
beep whose interval doubles during the last 15 seconds of the set supervision
delay.
If a supervised window or door is opened during the supervision period, an
associated fault message is triggered and other predefined actions are initi-
ated (with an adjustable message delay for doors).
Fault messages due to open doors/windows are deactivated by adjust-
ing the supervision type (Inactive / Partly monitored / All monitored).
This also interrupts triggered, predefined actions.
Detailed descriptions:
Trigger a switching group via an event page 60.
Set the supervision delay page 65.
Event buzzer and status output page 68.
Setting the supervision release page 66.
Apartment
Apartment timer function
By pressing the
Apartment timer
button (
), you can force the heating /
cooling and ventilation to maintain operating mode Comfort for an adjustable
period of time. When pressing the button, the apartment timer window opens.
Use the
Arrow
buttons or the
Apartment timer
button to set the required
period of time for Comfort mode.
For each room you can select whether the apartment timer function
should be performed (refer to ”Apartment timer influence“ on page 40).
The apartment timer function can also be selected via the following operating
line:
Main menu > Apartment > Apartment operating mode > Apartment timer:
If you want to switch off the apartment timer before the adjusted period of time
has elapsed, press again the
Apartment timer
button and set the time to
”00.00“.
In the case of a manual change of operating mode via the
Mode
button, the
apartment timer function will also be deactivated.
Apartment operating mode
When pressing the
Mode
button, an additional window appears (Mode pop-
up). Now, you can select the required apartment operating mode (heating,
cooling, ventilation) with the
Arrow
buttons or the
Mode
button.
