Selecting the fixed speed setpoint, binary
You set 16 different fixed speed setpoints. You precisely select one of these 16 fixed speed
setpoints by combining four selection bits.
)L[HGVSHHGVHWSRLQWVHOHFWLRQELW
)L[HGVSHHGVHWSRLQWVHOHFWLRQELW
)L[HGVSHHGVHWSRLQWVHOHFWLRQELW
)L[HGVSHHGVHWSRLQWVHOHFWLRQELW
)L[HGVSHHGVHWSRLQW
)L[HGVSHHGVHWSRLQW
)L[HGVSHHGVHWSRLQWHIIHFWLYH
)L[HGVSHHGVHWSRLQW
)L[HGVSHHGVHWSRLQW
)L[HGVSHHGVHWSRLQW
U
S
S
S
S
S
S
S
S
S
Figure 6-38 Simplified function diagram when selecting the fixed speed setpoints, binary
Additional information about binary selection can be found in function diagram 3010 in the List
Manual.
Parameters to set the fixed speed setpoints
Parameter
Description
p1001
Fixed speed setpoint 1 (factory setting: 0 rpm)
p1002
Fixed speed setpoint 2 (factory setting: 0 rpm)
...
...
p1015
Fixed speed setpoint 15 (factory setting: 0 rpm)
p1016
Fixed speed setpoint mode (factory setting: 1)
1:
Direct
2:
Binary
p1020
Fixed speed setpoint selection bit 0 (factory setting: 0)
p1021
Fixed speed setpoint selection bit 1 (factory setting: 0)
p1022
Fixed speed setpoint selection bit 2 (factory setting: 0)
p1023
Fixed speed setpoint selection bit 3 (factory setting: 0)
r1024
Fixed speed setpoint effective
r1025.0
Fixed speed setpoint status
1 signal
Fixed speed setpoint is selected
Advanced commissioning
6.16 Setpoints
SINAMICS G120C converter
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34263257B AF
241
