Terminal strips for FSD … FSF with wiring example
99RSWLRQDOSRZHUVXSSO\
W\SLFDOO\$
5HIHUHQFHIRUWHUPLQDO
5HIHUHQFHIRUWHUPLQDOVDQG
5HIHUHQFHIRUWHUPLQDOVDQG
9RXWSXWUHIHUUHGWR*1'PD[P$
5HIHUHQFHIRUWHUPLQDOVDQG
$QDORJLQSXW99P$P$
5HIHUHQFHIRU7HUPLQDO
$QDORJRXWSXW99P$P$
5HIHUHQFHIRUWHUPLQDOVDQG
7HPSHUDWXUHVHQVRU37&.7<3WELPHWDO
'LJLWDORXWSXWPD[$9
5HIHUHQFHIRUWHUPLQDOVDQG
5HIHUHQFHIRUWHUPLQDOVDQG
'LJLWDORXWSXWPD[$9
9RXWSXWUHIHUUHGWR*1'PD[P$
'LJLWDOLQSXWV
IRUFRQQHFWLQJ3RU0VZLWFKLQJFRQWDFW
ORZ9KLJK!9PD[9
;
;
;
;
9,1
*1',1
',&20
*1'
9RXW
*1'
$,
$,
$2
*1'
'2
'2
702725
702725
9RXW
*1'
',&20
',
',
',
',
',
',
'212
'2&20
'21&
9
H[W
*1'
H[W
!N˖
Figure 4-25 Wiring example of the digital inputs with the internal inverter 24 V power supply
All terminals with the reference potential "GND" are connected to each other inside the inverter.
Reference potentials "DI COM1" and "DI COM2" are electrically isolated from "GND".
→ if, as described above, you use the 24‑V power supply from terminal 9 to supply the digital
inputs, then you must connect "GND" with "DI COM1" and "DI COM2" at the terminals.
When an optional 24 V power supply is connected to terminals 31, 32, the inverter remains in
operation even after the Power Module has been disconnected from the line supply. As a
consequence, the inverter maintains fieldbus communication, for example.
→ for terminals 31, 32 only use a 24 VDC power supply with PELV (Protective Extra Low
Voltage).
→ for applications in the USA and Canada: Use a 24 VDC power supply, NEC Class 2.
→ connect the 0 V of the power supply with the protective conductor.
→ if you also wish to use the power supply at terminals 31, 32 for the digital inputs, then you
must connect "DI COM1/2" and "GND IN" with one another at the terminals.
For the analog input, you can use the internal 10 V supply or an external voltage source.
*1'
',&20
',&20
9,1
*1',1
$,
$,
Installing
4.9 Connecting the interfaces for the inverter control
SINAMICS G120C converter
86
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34263257B AF
