Configuring with the WBM
6.3 The menu items of the WBM
SIMATIC RF360R
Configuration Manual, 03/2022, C79000-G8976-C629-02
41
Figure 6-3
The "Homepage" menu item
Device-specific information
The first area contains device-specific information. The "Device type", "MLFB", "Hardware" and
"Serial number" boxes are specified in the factory. The content of the "Firmware" and
"Firmware version" boxes depends on the firmware stored on the reader. Using the "Update
firmware" link, you jump to the "System" menu item in which you can update firmware. The
"Configuration ID" box contains a unique identifier for the configuration that was last
activated on the reader or loaded onto the reader. Click the "Default configuration" button to
reset the parameters shown in the user interface to the default values. When you restore the
default configuration, address information (IP address, device name) is retained. You can use
the "Readme OSS" link to open the readme with the copyright information of the open source
software contained in this product as well as its license conditions.
Project ID
The second area contains input boxes with which you can store your own device-specific
information on the reader. Among other things, this is intended to make it easier to identify
the individual readers. Via the link "SNMP MIB-II system", you jump to the "Communication"
menu item, where you can view and change the MIB variables.
Address information
The third area contains all the important address information with which the PC or controller
can reach the reader. You can assign the IP address and PN device names to the reader using
"SINEC PNI" and "STEP 7". Via the link "IP Address" you jump to the "System" menu item inn
which you can also reassign the IP address.
