Configuring with the WBM
6.3 The menu items of the WBM
SIMATIC RF360R
72
Configuration Manual, 03/2022, C79000-G8976-C629-02
Factory setting
In the "Factory settings" area, you can restore the reader's factory settings or preset default
values or restart it.
•
Factory setting
Using the "Factory settings" button, you can restore the factory configuration settings on
the reader. When you restore the factory settings of the reader, all set configuration data,
settings of the user management and address information are lost. After the reset, the
reader is automatically restarted. Note that you then need to assign new IP addresses to
the reader.
If you lose your administrator password, you must reset the reader to the factory settings
as described in the section "Restoring the factory settings for the hardware (Page 98)".
•
Restart
You can use the "Reboot" button to restart the reader.
•
Default values
You can use the "Default values" button to reset the parameter values of the reader to the
factory configuration settings. When resetting to the default values, all set configuration
data is lost, but user management settings and address information are retained.
Device description files
The GSDML and ESD files current at the time of delivery as well as the OPC UA device
description file are stored on the reader. Click the "Save on PC" button to transfer device
description files to the connected PC. You can use these files to integrate the readers into the
configuration software of your controllers.
6.3.13
The "Help" menu item
Service and Support
The "Help - Service and Support" menu item includes information on the RF360R reader and
the WBM, as well as links to the relevant documents and the Siemens Industry Online
Support.
Manual
With the "Help - Operating Instructions" menu item, you can find the corresponding "SIMATIC
RF360R" manual for the reader.
Readme OSS
In the "Help - Readme OSS" menu item, you will find the Readme OSS file with the copyright
information for the open source software contained in this firmware.