Siemens SENTRON PAC4200, Manual, Page: 98 / 252

Operator control
8.1 Device interface
SENTRON PAC4200
98
Manual, 09/2008, A5E02316180B-01
Function keys: Key labeling - Key surfaces
The four function keys F1 to F4 enable operator input to the device:
●
Navigation in the menus
● Selection of the measured value displays
● Display and editing of the device settings
The keys have multiple assignments. Function assignments and key labeling change
according to the context of operator input. The designation of the current key function can be
seen above the key number in the footer area of the display.
A short press on the key triggers the function once. Holding the key down for longer switches
on the autorepeat function after approximately 1 second. The function of the key is triggered
repeatedly while the key is held down. Autorepeat is useful, for example, for fast
incrementing of values when parameterizing the device.
Organization of information
The display organizes the viewable information as follows:
Measured variables
●
Display of the measured variables
The display shows the measured values of the currently selected measured variable.
Menus
●
"MAIN MENU"
The display lists the viewable measured variables.
● "SETTINGS" menu
The display lists the device settings.
The "SETTINGS" menu is a submenu of the "MAIN MENU".
The "SETTINGS" menu contains further submenus.
Device settings
●
Display of the device settings
The display shows the values of the currently effective device settings.
● Edit mode of the device settings
The display enables editing of the device settings.