manualshive.com logo in svg

Siemens SENTRON PAC4200, Manual, Page: 162 / 252

Share
Download
Siemens SENTRON PAC4200 Manual Download Page 162

Technical data 

 

11.1 Technical data 

 

SENTRON PAC4200 

162

 

Manual, 09/2008, A5E02316180B-01 

Safety regulations 

 

CE conformity  
 

 

 
SENTRON PAC4200 complies with the requirements of the following European Directives: 
DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of December 15, 

2004, on the approximation of the laws of the Member States relating to electromagnetic compatibility 

and repealing the Directive 89/336/EEC 
DIRECTIVE 2006/95/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of December 12, 

2006, on the harmonization of the laws of the Member States relating to electrical equipment 

designed for use within certain voltage limits. 
Conformity with these Directives is verified by compliance with the following standards: 
EN 55011:2007; Group 1, Class A 

DIN EN 61000-6-2:2006 

DIN EN 61000-4-2:2001 

DIN EN 61000-4-5:2007 

DIN EN 61000-4-6:2001 

DIN EN 61000-4-8:2001 

DIN EN 61000-4-11:2005 

DIN EN 61010-1:2002 

DIN EN 61326-1:2006 

 
Approvals for the USA and Canada 
 

 

 
SENTRON PAC4200 is approved by UL, File No. E314880. 
FCC Class A Notice: This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) this device may not cause harmful interference, and (2) this device must 

accept any interference received, including interference that may cause undesired operation.  

Summary of Contents for SENTRON PAC4200





























































































































































































































































Reviews:

No comments