Siemens SENTRON PAC4200, Manual, Page: 142 / 252

Parameterizing
9.2 Parameterizing the operator interface
SENTRON PAC4200
142
Manual, 09/2008, A5E02316180B-01
9.2.12.1 Calling password management
You can find password management in the device settings under
"ADVANCED > PASSWORD"
To access password management:
1. Exit the measured value display. Call the "MAIN MENU":
F4
2. In the main menu, go to the "SETTINGS" entry:
F2 or F3
3. Call the "SETTINGS" entry:
F4
4. In the "SETTINGS" menu, go to the "ADVANCED" entry:
F2 or F3
5. Call the "ADVANCED" entry:
F4
6. In the "ADVANCED" menu, call the "PASSWORD PROTECTION" entry:
F4
9.2.12.2 Switch on password protection
Password protection can be switched on at any time.
NOTICE
Password known?
Before you switch on password protection, make sure you and the group of authorized
users are all in possession of the password. If password protection is switched on, the
password is mandatory for all changes to the device settings. You also require the
password to call the "PASSWORD" dialog box again in order to switch off access protection
or to change the password.
Password protection is effective as soon as it is switched on! The password protection
symbol in the display title changes from "unprotected" to "protected". While you are in
the "PASSWORD PROTECTION" dialog box, you can switch password protection off again
or view the password in the "PASSWORD" field.