manualshive.com logo in svg

Siemens SENTRON PAC4200, Manual, Page: 97 / 252

Share
Download
Siemens SENTRON PAC4200 Manual Download Page 97

 

SENTRON PAC4200 
Manual, 09/2008, A5E02316180B-01 

97

 

Operator control 

8

8.1

 

Device interface 

8.1.1

 

Displays and operator controls 

Displays and operator controls 

The front of SENTRON PAC4200 has the following displays and operator controls. 

 

(1) 

Display of the measured values, device settings, selection menus 

(2) 

Display title 

(3) 

Labeling of the function keys 

(4) 

Surfaces of the function keys 

Figure 8-1 

User interface of SENTRON PAC4200 

Display: Display - Display title - Key labeling 
The display is structured as follows: 
●

 

Display area - represents the current measured values, device settings and selection 

menus. 

●

 

Header area - specifies the information visible in the display area. 

●

 

Footer area - specifies the functions assigned to the function keys. 

Summary of Contents for SENTRON PAC4200





























































































































































































































































Reviews:

No comments