manualshive.com logo in svg

Siemens SENTRON PAC4200, Manual, Page: 65 / 252

Share
Download
Siemens SENTRON PAC4200 Manual Download Page 65

 

Installation 

 

5.4 Deinstalling 

SENTRON PAC4200 
Manual, 09/2008, A5E02316180B-01 

65

 

Deinstallation steps  

1.

 

Discharge any static from your body in accordance with the ESD guidelines. 

 

CAUTION 

 

 

Electrostatic sensitive devices 
Ground your body! Discharge your body of any static electricity! 

 

2.

 

Start deinstallation on the inside of the switching panel. 

3.

 

Release the clamping arrangement on the switching panel. To do so, unscrew the four 

screws on the two brackets. Leave the screws in the brackets. 

4.

 

Carefully lever the locking hooks open with the slotted screwdriver or another suitable 

tool. The bracket releases immediately. 

5.

 

Go to the outside of the switching panel and remove the device from the cutout. 

6.

 

Pack the device into the original box together with the operating instructions and the 

delivered components listed in the operating instructions. 

Deinstallation is complete. 

 

Figure 5-5 

Deinstallation, releasing the locking hooks 

See also 

ESD guidelines (Page 243) 

Summary of Contents for SENTRON PAC4200





























































































































































































































































Reviews:

No comments