manualshive.com logo in svg

Siemens SENTRON PAC4200, Manual, Page: 59 / 252

Share
Download
Siemens SENTRON PAC4200 Manual Download Page 59

 

Installation 

 

5.2 Insert battery 

SENTRON PAC4200 
Manual, 09/2008, A5E02316180B-01 

59

 

Procedure 

1.

 

Discharge any static from your body. Observe the ESD guidelines in the Appendix. 

 

CAUTION 

 

 

Electrostatic sensitive devices 
Discharge your body of any static electricity! Touch the grounded control cabinet, for 

example, or a metal part that is connected to the building ground (heater, steel support).

 

2.

 

Remove the battery from the SENTRON PAC4200 delivery carton. 

 

NOTICE 

 

 

Reduced service life of the battery 
Grease or dirt on the contacts forms a transfer resistance that reduces the service life of 

the battery. 
Hold the battery by the edges only. 

 

3.

 

Take note of the polarity indicated at the insertion opening of the battery compartment. 

Insert the battery into the battery compartment. 

 

 

 

Note 
Polarity of the battery 
The opening of the battery compartment has the same shape as the battery. This 

determines the alignment of the terminals. It is not possible to insert the battery 

incorrectly.  

 

 

Figure 5-1 

Using the battery 

See also 

Technical data (Page 153) 

Summary of Contents for SENTRON PAC4200





























































































































































































































































Reviews:

No comments