manualshive.com logo in svg

Siemens SENTRON PAC4200, Manual, Page: 57 / 252

Share
Download
Siemens SENTRON PAC4200 Manual Download Page 57

 

SENTRON PAC4200 
Manual, 09/2008, A5E02316180B-01 

57

 

Installation 

5

5.1

 

Unpacking 

Observe the ESD Guidelines. Open the packaging carefully. Do not use excessive force.  

Check the packaging 

Carry out the following checks after receipt of the device and before installation: 
●

 

Ensure the packaging is undamaged. 

●

 

Make sure that the contents of the package are complete. 

●

 

Check the device for external damage. 

Please contact your Siemens sales partner in the following cases: 
●

 

The packaging is damaged 

●

 

The contents of the package are not complete 

●

 

The device is damaged. 

 

WARNING 

 

 

Damaged devices 
Damaged devices may show signs of safety defects. They can result in serious injury 

and property damage. 
Do not install or start up damaged devices. 

 

Storage 

Store the SENTRON PAC4200 in dry conditions. 

 

NOTICE 

 

Avoid condensation 
Sudden fluctuations in temperature can lead to condensation. Condensation can affect the 

function of the device. Store the device in the operating room for at least 2 hours before 

commencing installation. 

 

 

Summary of Contents for SENTRON PAC4200





























































































































































































































































Reviews:

No comments