Siemens SCALANCE XM-400, Configuration Manual

Page: 717 / 960

Layer 3 functions
9.8 Route maps (IPv4 / IPv6)
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
717
Syntax
Call up the command with the following parameters:
match interface {Vlan < vlan-id(1-4094)> | <interface-type> < interface-id> }
The parameters have the following meaning:
Parameter Description Range of values / note
Vlan
Keyword for a VLAN -
vlan-id
Keyword for a VLAN connection 1 ... 4094
interface-type
Type or speed of the interface Enter a valid interface.
interface-id
Module no. and port no. of the
interface
Result
The filter for the interface is created.
Further notes
You delete the filter for the interface with the
no match interface
command.
You change to the Route maps configuration mode with the command
route-map
.
You display the setting and other information with the
show route-map
command.
9.8.3.6 no match interface
Description
With this command, you delete the filter for the interface.
Note
This command is available only with layer 3.
Requirement
You are now in the Route maps configuration mode.
The command prompt is as follows:
cli(config-rmap-$$$)#
Syntax
Call up the command with the following parameters:
no match interface {Vlan < vlan-id(1-4094)> | <interface-type> < interface-id> }