Layer 2 management protocols
8.2 IGMP
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
449
Further notes
You define a multicast group with the
ip igmp group-list
command.
You display the configured multicast groups with the
show ip igmp group-list
command.
You delete the limit for learnable multicast groups on an interface with the
no ip igmp limit
command.
You display the setting and other information with the
show ip igmp global-config
command.
8.2.3.10
no ip igmp limit
Description
With this command, you delete the limit for learnable multicast groups on the an interface.
Requirement
You are in the Interface Configuration mode of VLAN.
The command prompt is as follows:
cli(config-if-vlan-$$$)#
Syntax
Call the command without parameter assignment:
no ip igmp limit
Result
The limit is deleted.
Further notes
You define the maximum number of multicast groups that can be learned using IGMP on an
interface with the
ip igmp limit
command.
You display the setting and other information with the
show ip igmp global-config
command.
8.2.3.11
ip igmp query-interval
Description
With this command, you define the interval but which the multicast router sends IGMP
queries.
Summary of Contents for SCALANCE XM-400
Page 882: ......
