![Siemens SCALANCE XM-400 Configuration Manual Download Page 316](http://html.mh-extra.com/html/siemens/scalance-xm-400/scalance-xm-400_configuration-manual_382069316.webp)
Network protocols
7.2 IPv6 protocol
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
316
Configuration Manual, 06/2016, C79000-G8976-C252-11
Syntax
Call up the command with the following parameters:
ipv6 route <prefix> <prefix len>
(
[<NextHop>]
{
vlan <id>[<administrative distance>] [unicast]|[<administrative distance>] [unicast]
| [<interface-type> <interface-id>][<administrative distance>] [unicast]
}
)
The parameters have the following meaning:
Parameter
Description
Range of values / note
prefix
IPv6 address
Enter a valid IPv6 address.
prefix len
Number of bits belonging to the prefix
(from left to right)
1 ... 128 bits
128: The node (host) itself
NextHop
IPv6 address to which the selected addresses will be forwarded
Enter a valid IPv6 address.
vlan
Keyword for a VLAN connection
-
id
Number of the addressed VLAN
1 ... 4094
administrative
distance
Value for the administrative distance
0 ... 65535
Default: 1
unicast
Addressing mode unicast
-
interface-type
Type or speed of the interface
Enter a valid interface.
interface-id
Module no. and port no. of the interface
For information on names of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 42)".
Result
The entry is configured.
Further notes
You delete a static entry from the IPv6 routing table with the
no ipv6 route
command.
You display the IPv6 routing table with the
show ipv6 route
command.
7.2.3.8
no ipv6 route
Description
With this command, you delete a static entry from the IPv6 routing table.
Summary of Contents for SCALANCE XM-400
Page 882: ......