Network structures
6.3 Spanning Tree
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
248
Configuration Manual, 06/2016, C79000-G8976-C252-11
6.3.4.5
spanning-tree mst configuration
Description
With this command, you change to the MSTP configuration mode.
Requirement
●
MSTP is enabled
●
Compatibility mode: MSTP
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
spanning-tree mst configuration
Result
You are now in the MSTP configuration mode.
The command prompt is as follows:
cli(config-mst)#
Further notes
You exit the MSTP configuration mode with the
end
or
exit
command.
6.3.4.6
spanning-tree mst max-hops
Description
With this command, you configure the maximum number of nodes (hops) that a path can run
through in an MST.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Summary of Contents for SCALANCE XM-400
Page 882: ......
