Siemens SCALANCE XM-400 Configuration Manual Download Page 812

Page: 812 / 960

Security and authentication

11.1 User management

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

812

Configuration Manual, 06/2016, C79000-G8976-C252-11

associated role. If the corresponding group is known on the device, both tables are

evaluated. The user is assigned the role with the higher rights.

Requirement

You are in the Global configuration mode.
The command prompt is as follows:

cli(config)#

Syntax

Call up the command with the following parameters:

user-account-ext <user-name-ext> role <user-role-ext> [description <user-ext-
description>]

The parameters have the following meaning:

Parameter

Description

Range of values / note

user-account-ext

Keyword for a user in the table

"External User Accounts"

user-name-ext

User name

Enter the name for the user. The name

must meet the following conditions:

•

It must be unique.

•

It must be between 1 and 250 charac-

ters long.

role

Keyword for the role name

user-role-ext

Role name

Enter a role.
You can choose between system-defined

and self-defined roles.

description

Keyword for the description

user-ext-

description

Content of the description

Enter a description for the user in the

table "External User Accounts". The de-

scription text can be up to 100 characters

long.

Result

A link in the table "External User Accounts" has been created.

Note
User name cannot be changed
After creating a user, the user name can no longer be modified. If a user name needs to be

changed, the user must be deleted and a new user created.

Summary of Contents for SCALANCE XM-400

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE XM-400

Reviews:

Related manuals for SCALANCE XM-400

Brands by name

Popular brands

Siemens SCALANCE XM-400, Configuration Manual

Search results

Summary of Contents for SCALANCE XM-400

Reviews:

Related manuals for SCALANCE XM-400

Brands by name

Popular brands