Configuration
3.2 Load and Save
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
113
The parameters have the following meaning:
Parameter
Description
Range of values / note
filetype
Keyword for a file type to be loaded
-
filetype
Name of the file type
Maximum of 100 characters
tftp
Keyword for a TFTP server
-
ipv4
Keyword for an IPv4 address
ucast_addr
IPv4 unicast address of the TFTP
server
Enter a valid unicast IPv4 ad-
dress.
fqdn-name
Keyword for a domain name
-
FQDN
Domain name (Fully Qualified Domain
Name) of the TFTP server
Maximum of 100 characters
ipv6
Keyword for an IPv6 address
-
ip6_addr
IPv6 address of the TFTP server
Enter a valid unicast IPv6 ad-
dress.
port
Keyword for the port of the server via
which the TFTP connection runs
-
tcpport
Number of the port
1 … 65535
file
Keyword for a file name to be assigned -
filename
Name of the file
Maximum of 100 characters
For information on identifiers of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 42)".
For information on the file types , refer to this list (Page 109).
Result
The file is saved on the TFTP server.
3.2.4
Commands in the global configuration mode
This section describes commands that you can call up in the Global configuration mode.
In Privileged EXEC mode, enter the
configure terminal
command to change to this mode.
Commands relating to other topics that can be called in the Global configuration mode can
be found in the relevant sections.
You exit the Global configuration mode with the
end
or
exit
command and are then in the
Privileged EXEC mode again.
3.2.4.1
loadsave
Description
With this command, you change to the LOADSAVE configuration mode.
Summary of Contents for SCALANCE XM-400
Page 882: ......
