Siemens SCALANCE W1750D UI Configuration Manual Download

Page: 391 / 570

Services

24.1 Configuring AirGroup

SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02

391

clusters. The DNS records in the VC can be shared with all the VC configured for L3

Mobility.
By default, this feature is disabled. To define clusters, go to the System > L3 Mobility tab.

Ensure that the required AirGroup services are selected. To add any service, click New

and add. To allow all services, select allowall. If a custom service is added, you can add a

corresponding service ID by clicking New under Service ID.

Note
If an AP is upgraded to the current release with the Bonjour check box enabled, ensure

that the corresponding Bonjour services are selected.

Note
SCALANCE W supports the use of up to 6 custom services.

Based on the services configured, you can block any user roles from accessing an

AirGroup service and restrict the AirGroup servers connected to a specific set of VLANs

from being discovered . The user roles and VLANs marked as disallowed are prevented

from accessing the corresponding AirGroup service. You can create a list of disallowed

user roles and VLANs for all AirGroup services configured on the AP. For example, If the

AirPlay service is selected, the edit links for the airplay disallowed roles and airplay

disallowed vlans are displayed. Similarly, if sharing service is selected, the edit links for

the sharing disallowed roles and sharing disallowed vlans are displayed.
–

To block user roles from accessing an AirGroup service, click the corresponding edit

link and select the user roles for which you want to restrict access. By default, an

AirGroup service is accessible by all user roles configured in your AP cluster.

–

To block VLANs from allowing access to an AirGroup service, click the corresponding

edit link and select the VLANs to exclude. By default, the AirGroup services are

accessible by users or devices in all VLANs configured in your AP cluster.

ClearPass Settings—Use this section to configure the ClearPass Policy Manager server,

CoA server, and enforce ClearPass registering.
–

CPPM server 1—Indicates the ClearPass Policy Manager server information for

AirGroup policy.

–

Enforce ClearPass registering —When enabled, only devices registered with

ClearPass Policy Manager will be discovered by Bonjour devices, based on the

ClearPass Policy Manager policy.

In the CLI
To configure AirGroup:

(scalance)(config)# airgroup

(scalance)(airgroup)# enable [dlna-only | mdns-only]

(scalance)(airgroup)# cppm enforce-registration

(scalance)(airgroup)# cppm-server <server>

(scalance)(airgroup)# cppm-query-interval <interval>

(scalance)(airgroup)# disallow-vlan <vlan-ID>

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands

Siemens SCALANCE W1750D UI, Configuration Manual

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands