Siemens SCALANCE W1750D UI Configuration Manual Download

Page: 432 / 570

Uplink Configuration

26.4 Wi-Fi Uplink

SCALANCE W1750D UI

432

Configuration Manual, 02/2018, C79000-G8976-C451-02

Select a passphrase format from the Passphrase format drop-down list. The following

options are available:
–

8 – 63 alphanumeric characters

–

64 hexadecimal characters

Note
Ensure that the hexadecimal password string is exactly 64 digits in length.

Enter a Pre-Shared Key (PSK) passphrase in the Passphrase text box and click OK.

10.

Navigate to System > General > Show Advanced Options view and set the Extended

SSID parameter to Disabled.

11.

Reboot the AP to apply the changes. After the AP reboot, the Wi-Fi and mesh links are

automatically enabled.

In the CLI
To configure Wi-Fi uplink on an AP:

(scalance)(config) # wlan sta-profile

(scalance)(sta uplink)# cipher-suite<clear | wpa-tkip-psk | wpa2-ccmp-psk>

(scalance)(sta uplink)# essid <essid>

(scalance)(sta uplink)# uplink-band <band>

(scalance)(sta uplink)# wpa-passphrase <key>

(scalance)(sta uplink)# end

(scalance)# commit apply

To view the W-Fi uplink status in the CLI:

(scalance)# show wifi-uplink status configured :NO

To view the configuration status in the CLI:

(scalance)# show wifi-uplink config

ESSID :

Cipher Suite :

Passphrase :

Band :

(scalance)# show wifi-uplink auth log

----------------------------------------------------------------------

wifi uplink auth configuration:

----------------------------------------------------------------------

wifi uplink auth log:

----------------------------------------------------------------------

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands

Siemens SCALANCE W1750D UI, Configuration Manual

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands