Siemens SCALANCE W1750D UI Configuration Manual Download

Page: 26 / 570

About SCALANCE W

3.2 SCALANCE W UI

SCALANCE W1750D UI

Configuration Manual, 02/2018, C79000-G8976-C451-02

3.2

SCALANCE W UI

The SCALANCE W User Interface (UI) provides a standard web-based interface that allows

you to configure and monitor a Wi-Fi network. SCALANCE W is accessible through a

standard web browser from a remote management console or workstation and can be

launched using the following browsers:

●

Microsoft Internet Explorer 11 or earlier

●

Apple Safari 6.0 or later

●

Google Chrome 23.0.1271.95 or later

●

Mozilla Firefox 17.0 or later

If the SCALANCE W UI is launched through an unsupported browser, a warning message is

displayed along with a list of recommended browsers. However, the users are allowed to

Note
To view the SCALANCE W UI, ensure that JavaScript is enabled on the web browser.

Note
The SCALANCE W UI logs out automatically if the window is inactive for 15 minutes.

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands

Siemens SCALANCE W1750D UI, Configuration Manual

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands