Siemens SCALANCE W1750D UI Configuration Manual Download Page 165

Page: 165 / 570

Captive Portal for Guest Access

13.2 Configuring a WLAN SSID for Guest Access

SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02

165

Parameter

Description

Zone

Specify the zone for the SSID. When the zone is defined in SSID profile

and if the same zone is defined on an AP, the SSID is created on that AP.

For more information on configuring zone details, see Configuring Zone

Settings on an AP on page 67.
The following constraints apply to the zone configuration:

•

An AP can belong to only one zone and only one zone can be config-

ured on an SSID.

•

If an SSID belongs to a zone, all APs in this zone can broadcast this

SSID. If no AP belongs to the zone configured on the SSID, the SSID

is not broadcast.

•

If an SSID does not belong to any zone, all APs can broadcast this

SSID.

Time Range

Click Edit, select a Time Range Profile from the list and specify if the pro-

file must be enabled or disabled for the SSID, and then click OK.

Bandwidth Limits

Under Bandwidth Limits:

•

Airtime—Select this check box to specify an aggregate amount of

airtime that all clients in this network can use for sending and receiving

data. Specify the airtime percentage.

•

Each radio—Select this check box to specify an aggregate amount of

throughput that each radio is allowed to provide for the connected cli-

ents.

•

Downstream and Upstream—Specify the downstream and upstream

rates within a range of 1 to 65,535 Kbps for the SSID users. If the as-

signment is specific for each user, select the Peruser check box.

Wi-Fi Multimedia (WMM) traffic man-

agement

Configure the following options for WMM traffic management. WMM sup-

ports voice, video, best effort, and background access categories. To

allocate bandwidth for the following types of traffic, specify a percentage

value under Share. To configure DSCP mapping, specify a value under

DSCP Mapping.

•

Background WMM—For background traffic such as file downloads or

print jobs.

•

Best effort WMM—For best effort traffic such as traffic from legacy

devices or traffic from applications or devices that do not support QoS.

•

Video WMM—For video traffic generated from video streaming.

•

Voice WMM— For voice traffic generated from the incoming and out-

going voice communication.

For more information on WMM traffic and DSCP mapping, see Wi-Fi Mul-

timedia Traffic Management (Page 376).

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands

Siemens SCALANCE W1750D UI, Configuration Manual

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands