Siemens SCALANCE W1750D UI Configuration Manual Download

Page: 234 / 570

Authentication and User Management

14.11 Configuring WISPr Authentication

SCALANCE W1750D UI

234

Configuration Manual, 02/2018, C79000-G8976-C451-02

Enter the name of the Hotspot location in the Location name text box. If no name is

defined, the name of the AP to which the user is associated is used.

10.

Click OK to apply the changes.

The WISPr RADIUS attributes and configuration parameters are specific to the RADIUS

server used by your ISP for the WISPr authentication. Contact your ISP to determine these

values. You can find a list of ISO and ITU country and area codes at the ISO and ITU

websites (www.iso.org and http://www.itu.int).

Note
A Boingo smart client uses a NAS identifier in the <CarrierID>_<VenueID> format for

location identification. To support Boingo clients, ensure that you configure the NAS identifier

parameter in the RADIUS server profile for the WISPr server

In the CLI

(scalance)(config)# wlan wispr-profile

(scalance)(WISPr)# wispr-location-id-ac

(scalance)(WISPr)# wispr-location-id-cc

(scalance)(WISPr)# wispr-location-id-isocc

(scalance)(WISPr)# wispr-location-id-network

(scalance)(WISPr)# wispr-location-name-location

(scalance)(WISPr)# wispr-location-name-operator-name

(scalance)(WISPr)# end

(scalance)# commit apply

Summary of Contents for SCALANCE W1750D UI



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands

Siemens SCALANCE W1750D UI, Configuration Manual

Search results

Summary of Contents for SCALANCE W1750D UI

Reviews:

Related manuals for SCALANCE W1750D UI

Brands by name

Popular brands